|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
66193 SINGLE CHANNEL OPTOCOUPLERS REPLACEMENT FOR 3C91C Mii OPTOELECTRONIC PRODUCTS DIVISION Features: * * * * * High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature +500V electrical isolation Applications: * * * * * Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66193 contains a proton tolerant LED optically coupled to a silicon planar phototransistor. The optocoupler is built on a TO-46 header. The anode of the LED is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage...........................................................................................................................................................500V Emitter-Collector Voltage............................................................................................................................................................5V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................60V Reverse Input Voltage ...............................................................................................................................................................7V Input Diode Continuous Forward Current at (or below) 65C Free-Air Temperature (see note 1) .....................................50mA Peak Forward Input Current (Value applies for tw < 1s, PRR < 300 pps) .........................................................................50mA Continuous Collector Current .....................................................................................................................................................1A Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (see Note 2) .................................300mW Storage Temperature.......................................................................................................................................... -65C to +150C Operating Free-Air Temperature Range ............................................................................................................. -55C to +100C Lead Solder Temperature (10 seconds max.) .................................................................................................................... 240C Notes: 1. Derate linearly to +65C free-air temperature at the rate of 1.15 mA/C. 2. Derate linearly to 100C free-air temperature at the rate of 3 mW/C. Package Dimensions Schematic Diagram 4 LEADS 0.019O (0.48) 0.016O (0.41) 0.230O (5.84) 0.209O (5.31) EMITTER COLLECTOR 2 3 O0.100[2.54] ANODE 0.195O (4.95) 0.178O (4.52) 4 1 0.048 [1.22] 0.028 [0.71] 45 CATHODE 0.030 (0.76) MAX 0.210 [5.34] 0.170 [4.32] 0.50 [12.70] MIN 0.046 [1.17] 0.036 [0.91] DIMENSIONS ARE IN INCHES (MILLIMETERS) NOTE: ANODE ELECTRICALLY CONNECTED TO CASE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 44 66193 ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise specified. SINGLE CHANNEL OPTOCOUPLER (Replacement for 3C91C) PARAMETER Input Diode Static Reverse Current Input Diode Static Forward Voltage Input Diode Static Forward Voltage Reverse Breakdown Voltage Input Diode Capacitance SYMBOL IR VF VF BVR CIN MIN TYP MAX 1 2.0 2.2 UNITS A V V V PF TEST CONDITIONS VR = 3V IF = 10mA IF = 20mA IR = 100A V = 0V, f = 1MHz 7 12 25 OUTPUT TRANSISTOR TA = 25C unless otherwise specified. PARAMETER Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current SYMBOL V(BR)CEO V(BR)ECO ICEO1 ICEO2 MIN 50 7 TYP MAX UNITS V V TEST CONDITIONS IC = 1mA, IB = 0, IF = 0 IC = 10A VCE = 50V, VCE = 5V, IF = 0mA IF = 0mA 100 10 nA nA COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER On State Collector Current On State Collector Current On State Collector Current Collector-Emitter Saturation Voltage Isolation Resistance Input to Output Capacitance Delay Time Storage Time Rise Time Fall Time -55C SYMBOL IC(ON) IC(ON) IC(ON) VCE(SAT) RISO CIO td ts tr tf MIN 4 3 2 TYP MAX UNITS mA mA mA TEST CONDITIONS VCE = 5V, IF = 10mA VCE = 0.4V, IF = 10mA VCE = 5V, IF = 10mA IF = 50mA, IC = 10mA VIN-OUT = 500V f = 1MHz VCE = 5V, IF = 2mA, RL = 100 VCE = 5V, IF = 2mA, RL = 100 VCE = 5V, IF = 2mA, RL = 100 VCE = 5V, IF = 2mA, RL = 100 0.4 10 9 V 2 2 0.2 3 4 2.5 4 0.5 5 5 pF s s s s RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage Operating Temperature SYMBOL IFL MIN 0 2 5 -55 MAX 1 20 50 100 UNITS A mA V C IFH VCE TA SELECTION GUIDE PART NUMBER 66193-001 66193-011 66193-101 PART DESCRIPTION Single Channel optocoupler, commercial (0 to 70C) Single Channel optocoupler -55 to +100C Single Channel optocoupler -55 to+100C with 100% device screening MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 45 |
Price & Availability of 66193-101 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |